Televes DigiSlot DVB-T modulator, wall mount Manual de usuario descargar pdf (Pagina 10)

DVB-T modulator

4.6- Port

The UDP protocol port (like as 8001), you should use Output IP and new port to

receive IP Output data (like as udp://224.2.2.2:8001).

5) Network setting

After inter network setting, there are three Submenu Items for setting, just

show as the following LCD display pictures.

5.1 IP Address

5.2 Subnet Mask

5.3 Gateway

5.4 MAC Address

5.5 Reset Password

5.6 Web Manage Port

User can press “UP/DOWN” to choose this item. “Enter” and “LEFT/RIGHT” to

set the parameters.

Note: The MAC address is according to the factory setting, and it’s unique. The

display will respectively show as below:

IP Address

192.168.000.136

Subnet mask

255.255.255.000

Gateway

192.168.000.001

MAC Address

201110140940

Reset pasword ?

Yes No

Web Manage Port

00080

6) Save con g

Users enter save con g submenu for saving settings. Choose yes for con rm set.

Save Configuration?

Yes No

Saving config ...

7) Loading con g

At this menu, user can press UP/DOWN key to select and repress ENTER to

con rm. User can restore the device into the last saved con guration by

choosing “7.1” and restore the device into factory con guration by choosing

“7.2” the display will show as below:

7.1 Load Saved CFG

7.2 Load Default

Load Saved CFG ?

Yes No

Loading config ...

Note: In the  rst use of the product, it is recommended to “Load Default” before

starting with the con guration.

8) Version

User can check the hardware version and software version of this equipment

when enter this submenu.

EncoderModulator

SW 5.13b HW 5.0

4. Encoders

Ref. 554801 – 1 A/V Input (MPEG2)

CVBS L ---- Audio ---- R

(1) CVBS input (video input)

(2) Unbalanced audio input (left and right)

Ref. 554802 – 2 A/V Inputs (MPEG2)

CVBS L ---- Audio ---- R CVBS L ---- Audio ---- R

1 3

2 4

(1) CVBS input (video input) –Channel 1

(2) Unbalanced audio input (left and right) –Channel 1

(3) CVBS input (video input) –Channel 2

(4) Unbalanced audio input (left and right) –Channel 2

Ref. 554803 – 1 HDMI Input (MPEG4)

HDMI1 HDMI2

(1) HDMI input –Channel 1

(2) HDMI input –Channel 2

Input resolutions: 1280x720p60, 1280x720p50, 1920x1080i60, 1920x1080i50,

1920x1080p60, 1920x1080p50

Note: It is only possible to obtain on the output the signal of one input at a time.

When both inputs have signal at the same time, the signal on the output is

the one of HDMI1(if HDMI input is set in automatic see chapter 5.2, otherwise

the output will be from the input selected).

Note: 3D signal from Blu-ray 3D is not supported.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comentarios a estos manuales

Sin comentarios

Televes DigiSlot DVB-T modulator, wall mount Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios de tv Televes DigiSlot DVB-T modulator, wall mount